New Compact Track Loader

2023 New Holland C332 Compact Track Loader

VIN: JAF0C332HPM449369

Location

NEW HOLLAND ROSSVILLE

3340 W. State Route 26 East, Rossville, IN 46065

+1 (765) 379-3331

Highlights

Engine Type
FPT / F5H FL463A*G001
Engine Manufacturer
FPT
Horsepower
74 hp
Aspiration
Turbocharged Aftercooled with external EGR
Length
9 ft 9 in
Width
6 ft 5 in
Height
6 ft 8 in
Weight
9,630 lbs
Max Ground Speed
8 mph

Description

Make your workday more productive and comfortable with a 300 Series compact track loader from New Holland. These tough models deliver incomparable performance and craftsmanship. They hold fast to steep slopes and move easily through muddy or sandy terrain to complete jobs quickly and efficiently.

Features

New Creep Mode: For even more productivity, available creep mode (EH models only) lets you trench, cold-plane or cut brush with greater precision at slower speeds. For intense load-and-carry operations, the optional Glide Ride feature prevents loads from shifting during transport.

8" LCD Multifunction Display Makes Operation Easier: The new, customizable 8" LCD Multifunction Display with an integrated back-up camera gives you a quick, convenient look at engine settings and performance information, all while providing even greater visibility to the rear of the loader for better operating efficiency and safety.

Wide, Comfortable Cab With Superior Visibility: The 300 Series cab is one of the widest in the industry. It's quiet, easy to enter and exit, and provides a clear view in all directions, even to the raised bucket or attachments. You get an unprecedented view out the back thanks to the 8" LCD Multifunction Display, the large rear window, low engine hood and no rear frame towers. The fully sealed and pressurized cab minimizes dust and exhaust infiltration.

Finish Jobs Faster With Super Boom®: The Super Boom® vertical lift linkage provides more dump height and reach, so you can load material into the center of high-sided truck boxes or hoppers. But, it also maximizes visibility, providing a clear view to the cutting edge, to the bucket at full height, and to the sides and rear.

Power Through Tough Jobs: The reliable hydraulic system delivers fast cycle times. In-line hydraulic pumps produce less noise and provide extra-smooth operation. Add the optional high-flow hydraulics to run attachments hour after hour. New Holland Tier 4 Final engines deliver powerful performance, use less fuel and are easy to maintain to decrease your operating costs.

Smooth Ride, Longer Life: The low-profile track undercarriage makes cleanout easier, reduces noise and increases durability. It also provides a smoother ride, thanks to steel-embedded tracks rolling on the rubber instead of steel. Fewer moving parts than competitive designs mean less complexity—and complications—which adds up to longer track life.

Easy Access, Simplified Service: All daily service points are grouped together and the rear door and hood make it easy to get to them without tools. If ever needed, the entire cab can be tilted forward for unrivaled access to components and easy cab cleanout.

Engine

Manufacturer/model: FPT / F5H FL463A*G001

Bore/stroke, in (mm): 3.9 x 4.3 (99 x 110)

Displacement, in3 (L): 207 (3.4)

Fuel injection: HPCR Direct

Air intake: Turbocharged Aftercooled with external EGR

Horsepower per SAE J1349 Gross hp (kW): 74 (55) @ 2500 rpm

Horsepower per SAE J1349 Net hp (kW): 68 (51) @ 2500 rpm

Peak torque, lb-ft (Nm): 232 (314) @ 1400 rpm

Power Train

Travel speed, low range, mph (km/h): 5.1 (8.2)

Travel speed, high range (optional), mph (km/h): 8.0 (12.9)

Dimensions

Bucket hinge pin, in (mm): 131.1 (3330)

Top of ROPS, in (mm): 80.4 (2043)

Bottom of level bucket, fully raised, in (mm): 123.0 (3125)

Overall length without attachment with coupler, in (mm): 117.3 (2979)

Dump angle, degrees: 55

Dump reach (max height), in (mm): 34.4 (875) @ 45°

Rollback, bucket on ground, degrees: 33

Rollback, bucket at full height, degrees: 85

Track on ground, in (mm): 64.5 (1639)

Ground clearance (bottom of belly pan), in (mm): 9.6 (244)

Angle of departure, degrees: 32

Clearance circle without bucket, in (mm): 56.2 (1482)

Clearance circle rear, in (mm): 67 (1702)

Overall width, in (mm): 76.5 (1943)

Ground pressure, PSI (with spec belt): 4.2

Hydraulic System

Pump Flow, gpm (Lpm): 24.2 (91.5)

Optional High Flow, gpm (Lpm): 37.6 (142.5)

Enhanced High Flow, gpm (Lpm): -

Relief Pressure, psi (bar): 3,046 (210)

Performance Specs

Rated Operating Load @50% tip, lbs (kg): 3200 (1451)

Rated Operating Load @ 35% tip, lbs (kg): 2240 (1018)

Tipping Load, lbs (kg): 6400 (2902)

Breakout Force, lift cylinder, lbs (kN): 4840 (21.5)

Breakout force bucket cylinder, lbs (kN): 7360 (32.7)

Operating Weight, lbs (kg): 9630 (4370)

Payment

Step 1/2

Message

*** Compact Excavator prices are for base unit only, not inclusive of attachments. Please see your dealer for attachment pricing.

This price represents MSRP less (whatever discount is used). Dealer price may vary and may be less or more than the shown price. Please see authorized New Holland Construction dealer for final selling price.

*Financing for commercial use only. Payment amount is an estimate for illustrative purposes only. This is not an advertisement or offer of credit. Customer participation subject to approval by CNH Industrial Capital America LLC or CNH Industrial Capital Canada Ltd. (individually, and collectively, “CNH Capital”) of a completed credit application and acceptable documentation meeting CNH Capital’s credit, collateral, regulatory, and other requirements and guidelines. Not all customers may qualify for this rate or term. Down payment may be required. Taxes, freight, setup, delivery, additional options or attachments not included. Documentation fees and additional terms may apply. Subject to unit and program availability at time of purchase, and subject to change or cancellation without notice. Quoted information not valid after the last day of the calendar month in which it was provided. See your participating New Holland dealer for details and eligibility requirements.