New Mini Track Loader

New Holland C314 Mini Track Loader

S/N: SMP5N631KZMA00729

*Contact your dealer for full model details and availability. Above image may not be representative of the actual build.

Location

WASHINGTON CO. TRACTOR - Brenham

1889 Highway 290 East, Brenham, TX 77833

+1 (979) 836-4591

Highlights

Engine Type
Kubota D1305-E4B
Horsepower
24 hp
Fuel Capacity
7.9 gal
Length
7 ft 2 in
Height
4 ft 9 in

Description

Ditch the shovel, wheelbarrow and all the hard manual labor that goes with them — New Holland's mini track loader is all the equipment you need. The C314's impressive rated operating capacity and weight help check more jobs off your residential construction or landscaping to-do list. Plus, its narrow frame means there's no sacrificing top-grade performance in small spaces.

Features

Standard Equipment - Operator Environment

Hydraulic pilot joystick control

Loader and ground drive control lockout

Cushioned operator platform

Operator grab handles

Key start

Hand throttle

Cup holder

Pocket for cellular phone.

Standard Equipment - Hydraulics

3-spool loader control valve

1x dual acting auxiliary hydraulics

Proportional auxiliary hydraulic control on joystick with detent

Loader arm float

Standard Equipment - Electrical

12V power plug socket

Front and rear LED work lights

Master battery disconnect

Standard Equipment - Loader

Radial lift geometry

CII mech attachment coupler

Loader lift arm support strut

2x additional counterweight

Standard Equipment - Other Standard Features

Lock-able hood compartment

Horn

Standard Equipment - Engine

Engine tip-over shut-off

Glow plug starting aid

Locking fuel cap

Fuel filter with water separator

Electric fuel pump

Standard Equipment - Telematics

CASE SiteWatch™ Telematics - includes hardware and a 5-yr data subscription

Standard Equipment - Drivetrain

Dual hydrostatic drive motors

SAHR parking brake

5 roller undercarriage

Narrow rubber track belt

Standard Equipment - Warranty

Base warranty coverage: 2-Year/2,000-hour full machine limited warranty

Optional Equipment - Drivetrain

Wide rubber track belt

Optional Equipment - Hydraulics

Case drain attachment connection

Bio-hydraulic oil and lubricants

Optional Equipment - Loader

36 in dirt bucket

42 in dirt bucket

Bolt on bucket teeth

Bolt on bucket cutting edge

6x additional counterweights

Optional Equipment - Electrical

14-pin electrical auxiliary connection

Optional Equipment - Other

English, Spanish, or French Operator Manual

Operating Weight

Narrow Track (NT) 2X Counterweights (STD): 3,536 lb. (1 604 kg)

Wide Track (WT) 6X Counterweight (OPT): 3,783 lb. (1 716 kg)

Drivetrain

Transmission Type: Hydrostatic

Max. Travel speed: 4.7 mph (7.5 kph)

Parking brake Type: SAHR pin brake

Service Capacities

Fuel Tank: 7.9 gal. (30 L)

Engine oil w/ filter: 6.0 qt (5.7 L)

Hydraulic system: 4.5 gal. (17 L)

Engine Coolant: 0.9 gal. (3.5 L)

Dimensions

Overall Height: 56.5 in. (1 435 mm)

Overall Length Without Bucket: 85.6 in. (2 175 mm)

Machine Width Narrow Track: 35.0 in. (890 mm)

Machine Width Wide Track: 40.4 in. (1 026 mm)

Bucket Width Narrow Track: 36.0 in. (914 mm)

Bucket Width Wide Track: 42.0 in. (1 067 mm)

Loader Performance Specs

Lift Geometry: Radial Lift

Narrow Track Rated operating capacity - ROC* - 35% of tipping load: 992 lb. (450 kg)

Narrow Track Rated operating capacity - ROC* - 50% of tipping load: 1,416 lb. (643 kg)

Narrow Track Tipping load*: 2,833 lb. (1 285 kg)

Wide Track Rated operating capacity - ROC* - 35% of tipping load: 1,102 lb. (500 kg)

Wide Track Rated operating capacity - ROC* - 50% of tipping load: 1,574 lb. (714 kg)

Wide Track Tipping load*: 3,148 lb. (1 428 kg)

Engine

Model: Kubota D1305-E4B

Emissions Certification: Stage V

Cylinders: 3

Displacement: 77.0 cu. in. (1.261 L)

Fuel: Diesel

Exhaust aftertreatment: N/A

Engine speeds Rated - full load: RPM 2600

Horsepower @ 2600 RPM - SAE J1349 - Gross: 24.8 hp (18.5 kW)

Horsepower @ 2600 RPM - SAE J1349 - Net: 24 hp (18.0 kW)

Peak torque @ 1700 RPM: 59.1 lb. ft. (80.1 N·m)

Electrical

System Voltage: 12 Volts

Alternator: 60 amp

Battery: 62 AHR 540 cold-cranking amps @ 0 deg. F (-18 deg. C deg.)

Hydraulics

Implement pump type: Fixed Gear

Displacement: 1.2 cu. in. (19 cc)

Standard flow @rated engine RPM @ 100% efficiency: 13.2 gpm (50 L/min)

Loader control valve Type: Open center

Implement Hydraulics Operating Pressure: 2,800 psi (190 bar)

Payment

Step 1/2

Message

*** Prices are for base unit only, not inclusive of attachments. Please see your dealer for attachment pricing.

*All prices shown on the site are in local currency and are estimates only; final equipment prices of all deals are negotiated between the user and dealer. Price estimates do not include taxes, fees, dealer setup or freight. Specifications for units may not be exactly the same as shown as dealer inventory. Some attachments and buckets may be priced separately. See dealer for final attachment pricing. Site does not guarantee equipment is still available, or that it is located at specified dealer location. Contact your dealer for confirmation. Programs may change at any time.

†Financing for commercial use only. Payment amount is an estimate for illustrative purposes only. This is not an advertisement or offer of credit. Customer participation subject to approval by CNH Industrial Capital America LLC or CNH Industrial Capital Canada Ltd. (individually, and collectively, “CNH Capital”) of a completed credit application and acceptable documentation meeting CNH Capital’s credit, collateral, regulatory, and other requirements and guidelines. Not all customers may qualify for this rate or term. Down payment may be required. Taxes, freight, setup, delivery, additional options or attachments not included. Documentation fees and additional terms may apply. Subject to unit and program availability at time of purchase, and subject to change or cancellation without notice. Quoted information not valid after the last day of the calendar month in which it was provided. See your participating New Holland dealer for details and eligibility requirements.