New Skid Steer Loader

New Holland L320 Skid Steer Loader

S/N: JAF0L320KSM466110

*Contact your dealer for full model details and availability. Above image may not be representative of the actual build.

Location

BLUNIER IMPLEMENT CO

632 State Route 117, Eureka, IL 61530

+1 (309) 467-4530

Highlights

Engine Type
ISM / N844LTA
Engine Manufacturer
ISM
Horsepower
67 hp
Aspiration
Turbocharged Aftercooled with external EGR
Load Capacity
2,000 lbs
Length
8 ft 10 in
Width
5 ft 9 in
Height
6 ft 7 in
Weight
6,470 lbs
Wheelbase
44.4 in
Max Ground Speed
11.4 mph

Description

Meet your challenges head-on with 300 Series skid steer loaders from New Holland. Whether you work in construction, municipal road maintenance, landscaping or farming, these loaders are designed to make your workday more productive and comfortable.

Features

Superior Super Boom® Dump Height And Reach: The patented Super Boom® vertical lift linkage delivers maximum reach at maximum height to allow you to place loads precisely in the center of high-sided truck boxes or hoppers.

Powerful Performance, Fast Cycle Times, Smooth Operation: New Holland Tier 4 Final engines deliver powerful performance, use less fuel and are easy to maintain to decrease your operating costs. The reliable hydraulic system delivers fast cycle times. In-line hydraulic pumps produce less noise and provide extra-smooth operation. Add the optional high-flow hydraulics to run attachments hour after hour.

Save Time Between Jobsites: The 300 Series dual-range transmission provides travel speeds in excess of 11 mph to save time on and between job sites. It is standard on the L320, L321, L328, and L334. New Holland's long wheelbase gives you stability and smooth riding comfort. A new available creep mode (EH models only) gives you greater control for slow-speed operations like trenching.

8" LCD Multifunction Display Makes Operation Easier: The new, customizable eight-inch 8" LCD Multifunction Display with an integrated back-up camera gives you a quick, convenient look at engine settings and performance information, all while providing even greater visibility to the rear of the loader for better operating efficiency and safety.

Operator Comfort And Visibility That's Second To None: The 300 Series cab is one of the widest in the industry, with more headroom, shoulder room to accommodate any operator. Visibility is still the best in the business, with an unobstructed view to the back, and a clear sightline to the loader bucket through huge glass door. A see-through area on the cab roof gives you a clear view to the bucket a full height.

Easy Access, Simplified Service: Long service intervals and easy access to maintenance points reduces downtime and lost revenue. All daily service points are grouped together and the rear door and hood make it easy to get to them without tools. The entire cab and boom assembly tilts forward for unrivaled access to components and easy cab cleanout.

Engine

Manufacturer/model: ISM / N844LTA

Bore/stroke, in (mm): 3.31 x 3.94 (84 x 100)

Displacement, in3 (L): 135 (2.2)

Fuel injection: HPCR Direct

Air intake: Turbocharged Aftercooled with external EGR

Horsepower per SAE J1349 Gross hp (kW): 67 (50) @ 2800 rpm

Horsepower per SAE J1349 Net hp (kW): 64 (47.7) @ 2800 rpm

Peak torque, lb-ft (Nm): 153 (208) @ 1800 rpm

Power Train

Travel speed, low range, mph (km/h): 7.8 (12.5)

Travel speed, high range (optional), mph (km/h): 11.4 (18.3)

Dimensions

Bucket hinge pin, in (mm): 121 (3073)

Top of ROPS, in (mm): 78.7 (1998)

Bottom of level bucket, fully raised, in (mm): 114.3 (2902)

Overall length without attachment with coupler, in (mm): 105.7 (2697)

Dump angle, degrees: 52

Dump reach (max height), in (mm): 29.8 (758)

Rollback, bucket on ground, degrees: 34

Rollback, bucket at full height, degrees: 88

Wheelbase, in (mm): 44.4 (1128)

Ground clearance (bottom of belly pan), in (mm): 8 (203)

Angle of departure, degrees: 25

Clearance circle without bucket, in (mm): 50.7 (1289)

Clearance circle rear, in (mm): 62.9 (1599)

Rear axle to bumper, in (mm): 36.4 (924)

Overall width, in (mm): 69.1 (1755)

Hydraulic System

Pump flow, Standard Flow, gpm (Lpm): 20.6 (78)

Relief pressure, psi (bar): 3046 (210)

Optional high flow, gpm (Lpm): 30.7 (116.2)

Performance Specs

Rated operating load, 50% tip, lbs (kg): 2000 (905)

Tipping load, lbs (kg): 4000 (1814)

Breakout force, lift cylinder, lbs (kN): 3450 (15.3)

Breakout force, bucket cylinder, lbs (kN): 7300 (32.5)

Operating weight, lbs (kg): 6470 (2930)

Payment

Step 1/2

Message

*** Prices are for base unit only, not inclusive of attachments. Please see your dealer for attachment pricing.

*All prices shown on the site are in local currency and are estimates only; final equipment prices of all deals are negotiated between the user and dealer. Price estimates do not include taxes, fees, dealer setup or freight. Specifications for units may not be exactly the same as shown as dealer inventory. Some attachments and buckets may be priced separately. See dealer for final attachment pricing. Site does not guarantee equipment is still available, or that it is located at specified dealer location. Contact your dealer for confirmation. Programs may change at any time.

†Financing for commercial use only. Payment amount is an estimate for illustrative purposes only. This is not an advertisement or offer of credit. Customer participation subject to approval by CNH Industrial Capital America LLC or CNH Industrial Capital Canada Ltd. (individually, and collectively, “CNH Capital”) of a completed credit application and acceptable documentation meeting CNH Capital’s credit, collateral, regulatory, and other requirements and guidelines. Not all customers may qualify for this rate or term. Down payment may be required. Taxes, freight, setup, delivery, additional options or attachments not included. Documentation fees and additional terms may apply. Subject to unit and program availability at time of purchase, and subject to change or cancellation without notice. Quoted information not valid after the last day of the calendar month in which it was provided. See your participating New Holland dealer for details and eligibility requirements.