New Mini Excavator

New Holland E60C Mini Excavator

S/N: HHKHMC17HE0000564

*Contact your dealer for full model details and availability. Above image may not be representative of the actual build.

Location

BRIM TRACTOR - Klamath Falls

4304 Highway 39, Klamath Falls, OR 97603

+1 (541) 882-2571

Highlights

Engine Type
Yanmar 4TNV98C
Engine Manufacturer
Yanmar
Horsepower
64 hp
Fuel Capacity
21.7 gal
Length
18 ft 3 in
Height
8 ft 4 in
Weight
12,940 lbs
Boom Swing
70 deg left / 50 deg right
Max Dig Depth
11 ft 9 in
Max Reach
25 ft 5 in
Top Speed
2.5 mph

Description

Put big digging power in restricted areas and congested work sites with a C Series compact excavator from New Holland. The dozer blade and auxiliary hydraulics are standard equipment to improve your bottom line. You can work next to buildings, foundations and roads with greater confidence in a C Series compact excavator. They combine power, performance and versatility to make the very most of every minute of your day.

Features

Big Power In Restricted Spaces: C Series excavators deliver big digging and grading performance with SAE bucket breakout forces up to 8,490 lbf and dig depth up to 12.5 feet. Their compact design and zero/short tail swing mean you can dig, fill and grade in the most confined, congested areas. You can offset the excavator boom left or right within the operating range to match the situation. The C Series also offers more ground clearance and excellent dozer blade lift height for maneuvering and working in tough conditions.

More Selection, More Power: With seven models from 1.7 to 6 tons, there's nothing small about the performance of New Holland compact excavators. All models offer an increase in horsepower compared to previous models, powered by quiet, fuel-efficient Tier 4 Final engines up to 66.9 horsepower.

Comfortable Operation: Ease and comfort equate with operator productivity, so the wide C Series cab is designed for spaciousness, all-around visibility, comfortable seating and smooth control. New Holland's Auto Shift traveling system automatically downshifts when load increases to enhance travel torque on slopes and in difficult conditions, then shifts back up to secure a faster travel speed after the load decreases. The Auto Idle system activates when you are not using the operating levers to improve fuel efficiency.

Operator Station

Operator Station: Enclosed Cab

Engine

Model: Yanmar 4TNV98C

Emissions Certification: Tier 4 Final

Fuel: Diesel

Cylinders: 4

Displacement: 203 in³ (3319 cc)

Fuel injection: Electronic common rail

Gross horsepower - SAE J1995: 64.7 hp (48.3 kW) @2200 RPM

Cooling: Water-cooled

Drivetrain

Travel speeds - 1st: 1.4 mph (2.2 kph)

Travel speeds - 2nd: 2.5 mph (4.0 kph)

Maximum traction force: 11,680 lbf (52kN)

Gradeability: 35° (70%)

Ground pressure: CAB - 4.83 psi

Service Capacities

Fuel tank: 21.7 gal (82 L)

Hydraulic tank - Refill capacity: 15.9 gal (60 L)

Hydraulic tank - Total system: 29.1 gal (110 L)

Engine oil w/ filter change: 3.1 gal (11.6 L)

Radiator: 2.9 gal (11 L)

Dimensions

Arm (standard length): 4 ft 10 in (1.48 m)

Overall height: 8 ft 4 in (2550 mm)

Overall transport length: 18 ft 3 in (5600 mm)

Track overall length: 8 ft 4 in (2530 mm)

Track overall width: 6 ft 6 in (1990 mm)

Track shoe width: 15 in (380 mm)

Center to center - idler to sprocket: 6 ft 6 in (1990 mm)

Upper structure ground clearance: 2 ft 2 in (660 mm)

Minimum ground clearance: 1 ft 3 in (380 mm)

Tail swing radius: 3 ft 7 in (1080 mm)

Boom swing: 70° left/50° right

Tail swing overhang: 3.5 in (90 mm)

Operating weight: Cab: 12,940 lb (5870 kg)

Blade Specs

Backfill blade height: 1 ft 2 in (350 mm)

Backfill blade width: 6 ft 6 in (1990 mm)

Backfill blade rise above ground: 8 in (200 mm)

Backfill blade dig depth: 2 ft 4 in (700 mm)

Performance Specs

Maximum dig radius: 25 ft 5 in (6150 mm)

Dig radius at groundline: 24 ft 11 in (6010 mm)

Maximum dig depth: 11 ft 9 in (3570 mm)

Vertical straight wall dig depth: 10 ft 0 in (3040 mm)

Payment

Step 1/2

Message

*** Prices are for base unit only, not inclusive of attachments. Please see your dealer for attachment pricing.

*All prices shown on the site are in local currency and are estimates only; final equipment prices of all deals are negotiated between the user and dealer. Price estimates do not include taxes, fees, dealer setup or freight. Specifications for units may not be exactly the same as shown as dealer inventory. Some attachments and buckets may be priced separately. See dealer for final attachment pricing. Site does not guarantee equipment is still available, or that it is located at specified dealer location. Contact your dealer for confirmation. Programs may change at any time.

†Financing for commercial use only. Payment amount is an estimate for illustrative purposes only. This is not an advertisement or offer of credit. Customer participation subject to approval by CNH Industrial Capital America LLC or CNH Industrial Capital Canada Ltd. (individually, and collectively, “CNH Capital”) of a completed credit application and acceptable documentation meeting CNH Capital’s credit, collateral, regulatory, and other requirements and guidelines. Not all customers may qualify for this rate or term. Down payment may be required. Taxes, freight, setup, delivery, additional options or attachments not included. Documentation fees and additional terms may apply. Subject to unit and program availability at time of purchase, and subject to change or cancellation without notice. Quoted information not valid after the last day of the calendar month in which it was provided. See your participating New Holland dealer for details and eligibility requirements.