New Compact Track Loader

New Holland C345 Compact Track Loader

S/N: JAF0C345VSM468758

*Contact your dealer for full model details and availability. Above image may not be representative of the actual build.

Location

WASHINGTON CO. TRACTOR - Brenham

1889 Highway 290 East, Brenham, TX 77833

+1 (979) 836-4591

Highlights

Engine Type
FPT / F5BFL413E*B002*
Engine Manufacturer
FPT
Horsepower
90 hp
Aspiration
Turbocharged Aftercooled with external EGR
Length
10 ft 0 in
Width
6 ft 5 in
Height
6 ft 8 in
Weight
10,610 lbs
Max Ground Speed
8 mph

Description

Make your workday more productive and comfortable with a 300 Series compact track loader from New Holland. These tough models deliver incomparable performance and craftsmanship. They hold fast to steep slopes and move easily through muddy or sandy terrain to complete jobs quickly and efficiently.

Features

New Creep Mode: For even more productivity, available creep mode (EH models only) lets you trench, cold-plane or cut brush with greater precision at slower speeds. For intense load-and-carry operations, the optional Glide Ride feature prevents loads from shifting during transport.

8" LCD Multifunction Display Makes Operation Easier: The new, customizable 8" LCD Multifunction Display with an integrated back-up camera gives you a quick, convenient look at engine settings and performance information, all while providing even greater visibility to the rear of the loader for better operating efficiency and safety.

Wide, Comfortable Cab With Superior Visibility: The 300 Series cab is one of the widest in the industry. It's quiet, easy to enter and exit, and provides a clear view in all directions, even to the raised bucket or attachments. You get an unprecedented view out the back thanks to the 8" LCD Multifunction Display, the large rear window, low engine hood and no rear frame towers. The fully sealed and pressurized cab minimizes dust and exhaust infiltration.

Finish Jobs Faster With Super Boom®: The Super Boom® vertical lift linkage provides more dump height and reach, so you can load material into the center of high-sided truck boxes or hoppers. But, it also maximizes visibility, providing a clear view to the cutting edge, to the bucket at full height, and to the sides and rear.

Power Through Tough Jobs: The reliable hydraulic system delivers fast cycle times. In-line hydraulic pumps produce less noise and provide extra-smooth operation. Add the optional high-flow hydraulics to run attachments hour after hour. New Holland Tier 4 Final engines deliver powerful performance, use less fuel and are easy to maintain to decrease your operating costs.

Smooth Ride, Longer Life: The low-profile track undercarriage makes cleanout easier, reduces noise and increases durability. It also provides a smoother ride, thanks to steel-embedded tracks rolling on the rubber instead of steel. Fewer moving parts than competitive designs mean less complexity—and complications—which adds up to longer track life.

Engine

Manufacturer/model: FPT / F5BFL413E*B002*

Bore/stroke, in (mm): 3.9 x 4.3 (99 x 110)

Displacement, in3 (L): 207 (3.4)

Fuel injection: HPCR Direct

Air intake: Turbocharged Aftercooled with external EGR

Horsepower per SAE J1349 Gross hp (kW): 90 (67) @ 2500 rpm

Horsepower per SAE J1349 Net hp (kW): 84 (63) @ 2500 rpm

Peak torque, lb-ft (Nm): 282 (383) @ 1400 rpm

Power Train

Travel speed, low range, mph (km/h): 5.5 (8.9)

Travel speed, high range (optional), mph (km/h): 8.0 (12.2)

Dimensions

Bucket hinge pin, in (mm): 131.6 (3344)

Top of ROPS, in (mm): 80.4 (2043)

Bottom of level bucket, fully raised, in (mm): 123.2 (3129)

Overall length without attachment with coupler, in (mm): 120.2 (3054)

Dump angle, degrees: 45.3

Dump reach (max height), in (mm): 31.6 (802) @ 45°

Rollback, bucket on ground, degrees: 32

Rollback, bucket at full height, degrees: 83.1

Track on ground, in (mm): 64.5 (1639)

Ground clearance (bottom of belly pan), in (mm): 9.6 (244)

Angle of departure, degrees: 32

Clearance circle without bucket, in (mm): 57.7 (1465)

Clearance circle rear, in (mm): 67.9 (1725)

Overall width, in (mm): 76.5 (1943)

Ground pressure, PSI (with spec belt): 4.4

Hydraulic System

Pump Flow, gpm (Lpm): 24.2 (91.5)

Optional High Flow, gpm (Lpm): 39.9 (150.8)

Enhanced High Flow, gpm (Lpm): 35 (132.5)

Relief Pressure, psi (bar): 3,450 (237)

Performance Specs

Rated Operating Load @50% tip, lbs (kg): 4500 (2045)

Rated Operating Load @ 35% tip, lbs (kg): 3150 (1432)

Tipping Load, lbs (kg): 9000 (4091)

Breakout Force, lift cylinder, lbs (kN): 9188 (41.8)

Breakout force bucket cylinder, lbs (kN): 7462 (33.9)

Operating Weight, lbs (kg): 10,610 (4823)

Payment

Step 1/2

Message

*** Prices are for base unit only, not inclusive of attachments. Please see your dealer for attachment pricing.

*All prices shown on the site are in local currency and are estimates only; final equipment prices of all deals are negotiated between the user and dealer. Price estimates do not include taxes, fees, dealer setup or freight. Specifications for units may not be exactly the same as shown as dealer inventory. Some attachments and buckets may be priced separately. See dealer for final attachment pricing. Site does not guarantee equipment is still available, or that it is located at specified dealer location. Contact your dealer for confirmation. Programs may change at any time.

†Financing for commercial use only. Payment amount is an estimate for illustrative purposes only. This is not an advertisement or offer of credit. Customer participation subject to approval by CNH Industrial Capital America LLC or CNH Industrial Capital Canada Ltd. (individually, and collectively, “CNH Capital”) of a completed credit application and acceptable documentation meeting CNH Capital’s credit, collateral, regulatory, and other requirements and guidelines. Not all customers may qualify for this rate or term. Down payment may be required. Taxes, freight, setup, delivery, additional options or attachments not included. Documentation fees and additional terms may apply. Subject to unit and program availability at time of purchase, and subject to change or cancellation without notice. Quoted information not valid after the last day of the calendar month in which it was provided. See your participating New Holland dealer for details and eligibility requirements.